The correct operating steps for frame press

Frame-type hydraulic presses are increasingly recognized by customers due to their good structural rigidity, high precision, and strong resistance to eccentric loads. The following will introduce how to operate frame-type hydraulic presses correctly:

1. The operator must undergo corresponding courses and practical training in advance, and can only operate the press on their own after mastering complete operating techniques. For personnel who are not familiar with the structural performance of the equipment, they must operate under the guidance of professional personnel.

Before operating the equipment, operators should first check whether there are any abnormal phenomena in various parts of the equipment, eliminate external faults of the equipment, and avoid production losses caused by equipment failures to the enterprise.

3. Operators should regularly check whether there is oil leakage or other abnormal phenomena in the fuel tank. Once discovered, they should repair it in a timely manner and not allow the equipment to carry out unreasonable production with faulty problems.

If the equipment malfunctions and needs maintenance, the power must be cut off in a timely manner to ensure that all programs are stopped before repair can be carried out.

During the operation of the equipment, operators are not allowed to touch or adjust the mold with their hands to prevent personal injury.

6.It is necessary to ensure that the equipment is used within its capacity load range and not overloaded to avoid shortening the service life of the equipment.

7.It is strictly prohibited to exceed the maximum stroke of the frame hydraulic press slider, and the minimum height of the mold closure shall not be less than

Mastering the correct operating methods and strictly following standard specifications can not only extend the service life of the frame hydraulic press to a certain extent, but also protect the personal safety of operators.

Everything is done correctly for the sake of safety! Pengda hydraulic press gives you a sense of security and makes you fall in love with Chinese manufacturing!